Removal and Replacement Procedures for CRUs ETERNUS CS800 S4/S5 Hardware
U41840-J-Z125-7-76 507
Securing power cords
Figure 293: Securing power cord
● Thread the power cord through the cable clamp (1).
● Pull the cable clamp up (2).
● Press the cable clamp down until it engages to secure the cable (3).
Hard Disk Drive
The hard disk drives which can be ordered for the ETERNUS CS800 server are supplied
already mounted in an installation frame so that defective hard disk drives can be replaced
during operation. The hard disk drive and installation frame together make up the HDD
module.
To Next Page
Loading...
