Storage Modules Hardware Description and Basic Operations
64 U41840-J-Z125-7-76
Figure 24: Rear view of JX40 - connections
Table 9: Status and meanings of each LED (controller)
LED name LED status Description
READY/FAULT green The controller is in normal status.
amber The controller is in error status.
SAS-OUT/
SAS-IN
Link/Fault
green SAS link up.
amber Specifies the SAS cable for exchange.
Status/Fault green The controller is in normal status.
green
(blinking)
Stand by.
amber Error detected.
UNIT ID LED
Ready/Fault LED
Debug(EXP-TTY)
SAS-OUT(Widelink)
SAS-OUT
Link/Fault LED
SAS-IN
Link/Fault LED
SAS-IN(Widelink)
Status/Fault LED AC Inlet
Ejector levers of a power supply unit Ejector levers of a power supply unit
To Next Page
Loading...
