Fujitsu PRIMERGY RX4770 M5 - Page 266

▶
"Removing the server from the rack" on page
49.
▶
"Getting access to the component" on page 47.
For memory slots from N to Z valid for the top system board.
▶
"Suspending BitLocker functionality" on page 85.
▶
"Shutting down the server" on page 45.
▶
"Disconnecting the power cord" on page 46.
▶
"Getting access to the component" on page 47.
▶
"Removing the CPU air duct" on page 72.
Removing the defective memory module
▶
Remove the memory module, see "Removing a memory module" on
page 263.
Installing the new memory module
▶
Install the memory module, see "Installing a memory module" on page 259.
Concluding steps
For memory slots from A to M valid for the bottom system board.
▶
Install the air duct on the bottom system board, see "Installing the CPU air
duct" on page 74.
▶
"Installing the top system board holder" on page 79.
▶
"Installing the riser module 3/4 and 6/7" on page 62.
▶
"Installing the fan cage" on page 71.
▶
Install the air duct on the top system board, see "Installing the CPU air duct"
on page 74.
▶
"Reassembling" on page 53.
▶
"Installing the server in the rack" on page 55.
▶
"Connecting the power cord (AC PSU)" on page 58.
Main memory
266 Upgrade and Maintenance Manual RX4770 M5