Fig. 76: Wireless LAN->WLANx->Bridge Links-> ->/New
The Wireless LAN->WLANx->Bridge Links-> ->/New menu consists of the following
fields:
Fields in the Bridge LinksBasic Parameters menu
Field Description
Bridge link description Enter a name for the bridge link.
If the Use Standard option is activated, the generated name
of the interface is automatically used.
If the option is not activated, you can enter a suitable name in
the input field.
The Use Standard option is enabled by default.
Remote configuration Select whether setup of a bridge link from a remote bridge is to
be permitted.
Possible values:
• Allowed (default value): It is possible to set up a bridge link
from a remote bridge.
• Denied: It is not possible to set up a bridge link from a re-
mote bridge.
Fields in the Bridge LinksBridge Security Settings menu
Funkwerk Enterprise Communications GmbH
11 Wireless LAN
bintec W1002/W1002n/W2002/WIx040/WIx065 173
To Next Page
Loading...
