FUTABA T10J - Page 68

69
Common function
The receiver voltage can be heard verbally from the transmitter with a commercial earphone (3.5φ
plug). The speech function can be turned on and o󱐯 with the specied switch.
Method
① Select "RX-BATT" from the telemetry
screen with the Jog key.
② Open the setting screen by
pressing the Jog key.
① In the RX-BATT screen state, select
(SPEECH) from the menu with the
Jog key.
② Select the "ACT" by pressing
the + key or – key.
① In the RX-BATT screen state, select
(SW) from the menu with the Jog
key.
In "NULL", a speech always turns on.
② Select the switch by pressing
the + key or – key.
Selection range：
NULL, SWA 〜 SWH
Calling the setting screen
Speech
Switch
● Listening to the receiver voltage by speech.
RX-BATT
(ALARM) (VIB) (LIMIT)
DN▶INH ▶OFF ▶ 6.0V
SPEECH▶ INH SW▶ NULL
0.0V
MIN/MAX=
0.0V / 0.0V
Speech
ACT / INH
Selects the switch
that turns the speech
function on and o󱐯.
＋ －
or
＋ －
or
ON
2 Position 3 Position
OFF
ON
OFF
OFF