GE HEALTHCARE PROPRIETARY TO GE
D
IRECTION 5344303-100, REVISION 3 VIVID P3 SERVICE MANUAL
4-28 Section 4-3 - General Procedure
4-3-11 CWD Functional Check
4-3-11-1 Preparations
1.) Connect 3S-6S to the system.
2.) Turn ON the scanner (if it is not turned on already).
4-3-11-2 Activating CW Doppler
Ensure that the appropriate CW probe is connected.
• Press CW key on the keyboard.
• The Doppler spectrum appears along with the CW Top/Sub menu.
The following CW parameters are displayed: Frequency, Gain, Acoustic Output, Scale, Wall Filter, and
Dynamic Range.
4-3-11-3 Exiting CW Doppler
To exit CW Doppler mode, press CW key.
To Next Page
Loading...
