GE HEALTHCARE PROPRIETARY TO GE
D
IRECTION 5344303-100, REVISION 3 VIVID P3 SERVICE MANUAL
Chapter 8 Replacement Procedures 8-65
6) Loosen two screws (a,b) of flexi cable from conn board to Tx board. Refer Figure 8-57 on page 8-65
Figure 8-57 Loosen screws of flexi cable
7) Remove flexi cable from conn board to Tx board Refer Figure 8-58 on page 8-65
Figure 8-58 Removing Flexi cable conn board
8) Use the screwdriver and remove four screws (1,2,3,4) of connector board from the system.
Refer Figure 8-54 on page 8-63
9) Slide the connector board out.
8-6-2-5 Mounting procedure
1.) Install the new parts in the reverse order of removal.
To Next Page
Loading...
