22
ENGLISH
Chapter 3 Operaons
3.1 Installaon
Devices connected to the equipment must meet the requirements of the applicable IEC standards. The system
conguraon must meet the requirements of the IEC 60601-1-1 medical electrical systems standard. Any personnel
who connect devices to the equipment’s signal input/output port are responsible for providing evidence that the
safety cercaon of the devices has been performed in accordance with IEC 60601-1-1. If you have any queson,
please contact the manufacturer or your local dealers.
If it is not evident from the equipment specicaons whether a parcular combinaon with other devices is
hazardous, for example, due to summaon of leakage currents, please consult the manufacturers or else an
expert in the eld, to ensure the necessary safety of paents and all devices concerned will not be impaired by
the proposed combinaon.
The equipment shall be installed by personnel authorized by manufacturer.
☞ The soware copyright of the equipment is solely owned by the manufacturer. No organizaon or individual shall
resort to modifying, copying, or exchanging it or to any other infringement on it in any form or by an means
without due permission.
3.1.1 Unpacking and Checking
1. Open the package, take out the monitor and its accessories from the box carefully and place it in a safe stable and
easy to watch posion.
2. Open the user manual to sort the accessories according to the packing list.
Inspect the accessories for any mechanical damages
Check all the exposed leads and inserted accessories
Check whether any risk or abnormity exists in the device and its accessories before using the monitor. If any
abnormity (such as broken cable or crack of the enclosure etc.) is found, stop using this device.
When disposing of the packaging material, be sure to observe the applicable waste control regulaons and keep
it out of children’s reach.
Before use, please verify whether the package are intact, especially the packages of single use accessories. In case
of any damage, do not apply it to paents.
☞ Save the packing case and packaging material as they can be used if the equipment must be reshipped.
☞ The user can customize the module conguraon by choosing necessary modules to meet your own needs. Therefore,
your monitor may not have all the monitoring funcons and accessories.
Please contact the local dealer or our company in case of any problems. We will oer the best soluon for your sasfacon.
3.1.2 Environmental Requirements
The operang environment of the equipment must meet the requirements specied in this manual. Otherwise,
unexpected consequences, e.g. damage to the equipment, could result.
To Next Page
Loading...
Need help?
General
