76
ENGLISH
Do not use baeries manufactured by other companies, which may cause damage to the device. If baery is
damaged, please replace with same type and specicaon baery marked by “CCC” or “CE” in me, or contact
the company directly.
Warning:
1. To avoid baery damage always remove baery(s) before shipping or storage.
2. It is recommended to use the baery specied by the manufacturer.
3. Life expectancy of a baery depends on how frequently and how long it is used. For a properly maintained and
stored lead-acid or lithium baery, its life expectancy is about 2 or 3 years respecvely. For more aggressive use
mode, life expectancy can be less. We recommend replacing lead acid baery every 2 years and lithium baery
every 3 years.
Cauon:
Keep the baery out of the reach of childrenNon smontare la baeria.
Do not disassemble baery
13.3 Baery Recycling
When a baery has visual signs of damage, or no longer holds a charge, it should be replaced. Remove the old baery
from the monitor and recycle it properly. To dispose of the baeries, follow local laws for proper disposal.
Chapter 14 Cleaning and Disinfecon
14.1 Cleaning the Device and Accessories
Your device should be cleaned on a regular basis. If there is heavy polluon or lots of dust and sand in your place,
the device should be cleaned more frequently. Before cleaning the equipment, consult your hospital’s regulaons for
cleaning the device.
Recommended cleaning agents are:
Sodium hypochlorite bleach (diluted)
Hydrogen peroxide (3%)
75% Ethanol
70% Isopropanol
To clean your device, follow these rules:
Switch o the monitor and disconnect the power cable before cleaning.
Kept the monitor from dust.
It is recommended to clean the outer shell and screen of the monitor to keep it clean. Only non-corrosive
cleanser such as clear water is permied.
Wipe the surface of the monitor and transducers with an Ethanol impregnated wipe, and dry it with dry and
To Next Page
Loading...
