GW Instek GPT-10000 Series - Page 123

OPERATION
123
Note
When in HOLD status, only the START and STOP
buttons can be pressed, all other keys are disabled.
FAIL STOP
1. If F.S (Fail Stop) is set for a MANU STEP, then
the tester will “Stop” the whole AUTO test
immediately when a FAIL judgment for that
particular MANU STEP occurs. See page 118
for more details.
FAIL
STOP
Setting
FAIL STOP setting
FAIL
HOLD
Result
Indicator
FAIL STOP indicator on exact MANU STEP
AUTO test stops in FAIL status
2. The FAIL indicator on the front
panel will also be lit and the
buzzer will sound accordingly.
3. When FAIL is displayed on-screen,
press the STOP button twice to
return to the READY status.