GW Instek GPT-10000 Series User Manual

GPT-10000 Series User Manual
154
Use the LEFT/RIGHT arrow soft-
keys to move the cursor to the TEST
NUM followed by using the scroll
wheel to determine the number of
selected test mode. Refer to page 42
& 108 for test number creation.
TEST NUM
001 - 100
Further use the LEFT/RIGHT
arrow soft-keys to move the cursor
to the AUTO TEST followed by
using the scroll wheel to turn on or
off the auto test function, which
indicates the test will start
automatically when the matched
barcode is scanned later.
AUTO TEST
ON, OFF
The MANU/AUTO NAME column
automatically reflects file name
corresponding to the existed file
name from the selected test number
in either mode. Refer to page 43 &
109 for test name creation.
Example of a
scanned barcode
with complete
settings
The scanned barcode is set with
AUTO-001 with AUTO TEST ON
Repeat the above steps to scan more barcodes
and edit the ensuing settings if necessary.

GW Instek GPT-10000 Series Specifications

General

Brand	GW Instek
Model	GPT-10000 Series
Category	Measuring Instruments
Language	English