EasyManua.ls Logo

H3C MSR810 - Page 373

H3C MSR810
389 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
361
Original packets assembled/fragmented (input/output): 0/0
Dropped fragments (input/output): 0/0
Unassigned fragments: 0
Bundle links:
Serial2/1/0
Link name: Serial2/1/0 Peer link name: Serial2/1/0
Physical state: Up Link state: Up Cause code: None
Timer: ACK 4 seconds Hello 10 seconds
Retry: Max 2 Current 0
Bundle link negotiation statistics:
Hello (Tx/Rx): 10/10 packets
Hello_ack (Tx/Rx): 10/10 packets
Add_link (Tx/Rx): 4/2 packets
Add_link_ack (Tx/Rx): 2/1 packets
Add_link_rej (Tx/Rx): 0/0 packets
Remove_link (Tx/Rx): 0/0 packets
Remove_link_ack (Tx/Rx): 0/0 packets
Packets dropped (input/output): 0/0
Bundle link fragment statistics:
MFR fragments(input/output): 0/0
Table 70 Command output
Field
Description
Physical state
Operating state of the physical interface:
• UP—The interface is physically up.
• DOWN—The interface is physically down.
• Administratively down—The interface has been administratively
shut down.
Link state
Operating state of the link protocol on the bundle link:
• Add sent—The interface sent an Add_link message and started
connection establishment.
• Ack rx—The interface received an Add_link acknowledgement
and is expecting an Add_link message from the peer.
• Add rx—The interface received an Add_link message and is
expecting an Add_link acknowledgement from the peer.
• Up—The bundle link was successfully negotiated, and the
interface can send frames.
• Idle—The bundle link was removed.
• Down—The bundle link was physically down.
• Down idle—The bundle link was physically down and removed.

Table of Contents