362
Cause code
Cause code for a bundle link state:
• None—Initial state.
• Ack timer expired—The ACK timer expires.
• Bundle link idle—The bundle link is not operational.
• Inconsistent bundle—Possible configuration mismatch
detected.
• Loopback detected—The bundle link has detected a potential
loopback condition.
• Unexpected add_link—An ADD_LINK message was received
when the bundle link was in up state.
• Other—Generic failure cause described by text in diagnostic
element.
Timer: Ack
Amount of time for which the bundle link waits for a hello or Add_link
acknowledgement before retransmitting a hello message or an
Add_link message (for initial synchronization).
Hello Interval for the bundle link to send hello messages.
Retry: Max
Maximum number of times that the bundle link can retransmit a hello or
Add_link message before receiving a hello or Add_link
acknowledgement.
Current Number of retries that have been made.
Hello (Tx/Rx) Number of hello messages sent/received.
Hello_ack (Tx/Rx) Number of hello acknowledgements sent/received.
Add_link_ack (Tx/Rx)
Number of Add_link acknowledgements sent/received.
An Add_link acknowledgement notifies the peer that the local end
received an Add_link message.
Add_link_rej (Tx/Rx)
Number of Add_link reject messages sent/received.
An Add_link_rej message notifies the peer that the local end rejected
an Add_link message.
Remove_link (Tx/Rx)
Number of Remove_link messages sent/received.
A Remove_link message notifies that the local end is removing a
bundle link from the bundle.
Remove_link_ack (Tx/Rx)
Number of Remove_link acknowledgements sent/received.
A Remove_link acknowledgement notifies the peer that the local end
received a Remove_link message.
Packets dropped (input/output) Number of incoming/outgoing packets dropped.
MFR fragments (input/output) Number of fragments sent/received by the bundle link.
Related commands
mfr bundle-name
mfr fragment size
mfr fragment enable
mfr link-name
mfr retry
mfr timer ack
mfr timer hello
To Next Page
Loading...
