74
Use undo pppoe-server access-line-id bas-info to restore the default.
Syntax
pppoe-server access-line-id bas-info [ cn-163 ]
undo pppoe-server access-line-id bas-info
Default
The nas-port-id attribute does not automatically include BAS information on an interface.
Views
Layer 3 Ethernet interface/subinterface view
Layer 3 virtual Ethernet interface/subinterface view
VLAN interface view
Layer 3 aggregate interface/subinterface view
VE-L3VPN interface/subinterface view
EFM interface/subinterface view
Predefined user roles
network-admin
Parameters
cn-163: Specifies the China-Telecom 163 format for the BAS information. If you do not specify this
keyword, BAS information in the China-Telecom format is included.
Usage guidelines
The bas-info formats include China Telecom and China Telecom 163.
BAS information in the China-Telecom format has the same format as the DSLAM upstream
interface information in the circuit-id in the China-Telecom format (see pppoe-server access-line-id
circuit-id parse-mode). The interface in the BAS information is the DSLAM access interface on the
BAS device.
Table 14 shows the China-Telecom 163 format, where:
• NAS_slot, NAS_subslot, and NAS_port refer to the numbering information of the DSLAM
access interface on the BAS device.
• vpi and vci refer to VPI and VCI information.
• vlanid and vlanid2 refer to inner VLAN and outer VLAN, respectively. Value for the vlanid of the
primary interface is fixed at 0.
Table 14 BAS information in China-Telecom 163 format
ATM interface
slot=NAS_slot;subslot=NAS_subslot;port=NAS_port;vpi
=XPI;vci=XCI;
Primary interface or interface that does not carry
inner VLAN or outer VLAN information.
slot=NAS_slot;subslot=NAS_subslot;port=NAS_port;vla
nid=VLAN id;
Interface that carries inner VLAN and outer
VLAN information.
slot=NAS_slot;subslot=NAS_subslot;port=NAS_port;vla
nid=VLAN id;vlanid2=VLAN id2;
This command determines the content of the nas-port-id attribute that the PPPoE server delivers to
the RADIUS server.
To Next Page
Loading...
