7-33
Figure 7-37 Removing a fan module
5. Install a new fan module. Insert the fan module into the slot, as shown in Figure 7-38.
Figure 7-38 Installing a fan module
6. Install the chassis access panel. For more information, see "Replacing the chassis access
panel."
7. Rack-mount the server. For more information, see "Installing the server."
8. Connect the power cord. For more information, see "Connecting the power cord."
9. Powe
r on the server. For more information, see "Powering on the server."
Verifying the replacement
Log in to HDM to verify that the fan module is in a correct state. For more information, see HDM
online help.
To Next Page
Loading...
