419
Item Descri
tion
Max Denial Count
Maximum denial count of client association requests.
If a client has been denied more than the maximum times on the 5 GHz radio, the AP
considers that the client is unable to associate to any other AP or the 2.4 GHz radio of the
AP, and allows the 5 GHz radio to accept the client.
By default, the AP allows the 5 GHz radio to accept the client.
RSSI Threshold
Band navigation RSSI threshold.
The AP checks the RSSI of a dual-band client before directing the client to the 5 GHz
radio. If the RSSI is lower than the value, the AP does not direct the client to the 5 GHz
band.
Aging Time
Client information aging time.
The AP records the client information when a client tries to associate to it. If the AP
receives the probe request or association request sent by the client before the aging time
expires, the AP refreshes the client information and restarts the aging timer. If not, the AP
removes the client information, and does not count the client during band navigation.
Configuring multicast optimization
Enabling multicast optimization
1. Select Advanced > Multicast Optimization from the navigation tree.
Figure 453 Configuring multicast optimization
2. Configure multicast optimization as described in Table 141.
3. Click Apply.
To Next Page
Loading...
Need help?
General
