H3C WA Series

234
Item Descri
p
tion
ACL
Specify the ACL to be used by the access device to restrict the access of the local user
after the user passes authentication.
IMPORTANT:
This option is only effective for common PPP and LAN users.
User-profile
Specify the user profile for the local user.
IMPORTANT:
• This option is only effective for common PPP and LAN users.
• The AP does not support configuring user profiles.
Configuring a user group
1. Select Authentication > Users from the navigation tree.
2. Click the User Group tab.
Figure 228 User group list
3. Click Add to enter the user group configuration page.
Figure 229 User group configuration page
4. Configure the user group as described in Table 89.
5. Click Apply.