H3C WA Series User Manual

134
Configuring dynamic domain name resolution
Ste
p
Remarks
1. Configuring dynamic domain name resolution
Required
Enable dynami
c domain name resolution.
This function is disabled by default.
2. Adding a DNS server address
Required
Not configured by default.
3. Adding a domain name suffix
Optional
Not configured by default.
4. Clearing dynamic DNS cache
Optional
Configuring static name resolution table
1. Select Network > DNS from the navigation tree to enter the default static domain name resolution
configuration page shown in Figure 134.
Figure 134 Static domain name resolution configurati
on page
2. Click Add to enter the page shown in Figure 135.
Figure 135 Create a static domain name resolution entry
3. Configure the static name resolution table as described in Table 60.
4. Click Apply.

H3C WA Series Specifications

General

Brand	H3C
Model	WA Series
Category	Wireless Access Point
Language	English