H3C WA Series User Manual

135
Table 60 Configuration items
Item Descri
p
tion
Host Name
Configure the mapping between a host name and an IP address in the static domain
mane table.
Each host name corresponds to only one IP address. If you configure multiple IP
addresses for a host name, the last configured one takes effect..
Host IP Address
Configuring dynamic domain name resolution
1. Select Network > DNS from the navigation tree
2. Click the Dynamic tab to enter the page shown in Figure 136.
3. Selec
t the Enable option for Dynamic DNS.
4. Click Apply.
Figure 136 Dynamic domain name resolution configuration page
Adding a DNS server address
1. Select Network > DNS from the navigation tree.
2. Click the Dynamic tab to enter the page shown in Figure 136.
3. Cli
ck Add IP to enter the page shown in Figure 137.
4. Enter an IP ad
dress in DNS Server IP address field.
5. Click Apply.

H3C WA Series Specifications

General

Brand	H3C
Model	WA Series
Category	Wireless Access Point
Language	English