351
Ste
Remarks
3. Configuring a rule for a basic IPv4 ACL
Required.
Complete one of the three steps according to the ACL
category.
4. Configuring a rule for an advanced IPv4 ACL
5. Configuring a rule for an Ethernet frame header
ACL
Recommended IPv6 ACL configuration procedure
Ste
Remarks
1. Adding a time range
Optional.
A rule referencing a time range takes effect only
during the specified time range.
2. Adding an IPv6 ACL
Required.
The category of the added IPv6 ACL depends on the
ACL number that you specify.
3. Configuring a rule for a basic IPv6 ACL
Required.
Complete one of the steps according to the ACL
category.
4. Configuring a rule for an advanced IPv6 ACL
Adding a time range
1. Select QoS > Time Range from the navigation tree.
2. Click the Add tab to enter the time range adding page.
To Next Page
Loading...
