12
Configuration summary
1. On the radio configuration page, click Next.
The configuration summary page appears, displaying all configurations you have made.
2. Click finish to complete your configurations.
Figure 10 Configuration summary page
Quick Start configuration examples
The wireless access methods that can be configured through the Quick Start wizard include simple text
authentication, WEP (Open-System) encryption, and WPA-PSK and WPA2-PSK authentication. To
configure other wireless access methods, for example, MAC address authentication and remote 802.1X
authentication, select Wireless Service > Access Service from the navigation tree and perform
configuration on the relevant page. For more information, see the configuration examples in
"Configuring wireless service."
Simple text authentication configuration example
Network requirements
As shown in Figure 11, deploy an AP to enable the client to access the internal network resources at any
time. The following requirements must be satisfied:
To Next Page
Loading...
Need help?
General
