H3C WA Series User Manual

328
Figure 350 Configure the wireless card (III)
Verifying the configuration
• After entering the username user and password dot1x in the popup dialog box, the client can
associate with the AP and access the WLAN.
• You can view the online clients on the page you enter by selecting Summary > Client from the
navigation tree.
Dynamic WEP encryption-802.1X authentication configuration
example
Network requirements
Perform dynamic WEP encryption-802.1X authentication on the client. More specifically,
• Use the iMC as a RADIUS server for AAA. On the RADIUS server, configure the client's username
as user, password as dot1x, and shared key as expert. The IP address of the RADIUS server is
10.18.1.88.
• On the AP, configure the shared key as expert, and configure the AP to remove the domain name
of a username before sending it to the RADIUS server. The IP address of the AP is 10.18.1.1.

H3C WA Series Specifications

General

Brand	H3C
Model	WA Series
Category	Wireless Access Point
Language	English