H3C WA Series User Manual

91
Figure 88 Create a MAC address entry
3. Configure the MAC address entry as described in Table 44.
4. Click Apply.
Table 44 Configuration items
Item Descri
p
tion
MAC Set the MAC address to be added.
Type
Set the type of the MAC address entry:
• static: Static MAC address entries that never age out.
• dynamic: Dynamic MAC address entries that will age out.
• blackhole: Blackhole MAC address entries that never age out.
IMPORTANT:
The tab displays the following types of MAC address entries:
• Config static: Static MAC address entries manually configured by the users.
• Config dynamic: Dynamic MAC address entries manually configured by the users.
• Blackhole: Blackhole MAC address entries.
• Learned: Dynamic MAC address entries learned by the device.
• Other: Other types of MAC address entries.
VLAN Set the ID of the VLAN to which the MAC address belongs.
Port Set the port to which the MAC address belongs.
Setting the aging time of MAC address entries
1. Select Network > MAC from the navigation tree.
2. Click the Setup tab to enter the page for setting the MAC address entry aging time, as shown
in Figure 89.

H3C WA Series Specifications

General

Brand	H3C
Model	WA Series
Category	Wireless Access Point
Language	English