H3C WA Series User Manual

115
Figure 117 IPv4 active route table
Table 53 Field description
Field Descri
p
tion
Destination IP Address
Destination IP address and subnet mask of the IPv4 route.
Mask
Protocol Protocol that discovered the IPv4 route.
Preference
Preference value for the IPv4 route.
The smaller the number, the higher the preference.
Next Hop Next hop IP address of the IPv4 route.
Interface
Outgoing interface of the IPv4 route. Packets destined for the
specified network segment will be sent out the interface.
Creating an IPv4 static route
1. Select Network > IPv4 Routing from the navigation tree.
2. Click the Create tab to enter the IPv4 static route configuration page, as shown in Figure 118.

H3C WA Series Specifications

General

Brand	H3C
Model	WA Series
Category	Wireless Access Point
Language	English