30
Field Descri
tion
Signal Quality
—If the signal strength indicator is represented by no
signal bar, it indicates that RSSI=0.
—If the signal strength indicator is represented by one
signal bar at the leftmost, it indicates that 0<RSSI<=15.
—If the signal strength indicator is represented by two
signal bars from the left, it indicates that 15<RSSI<=25.
—If the signal strength indicator is represented by three
signal bars from the left, it indicates that 25<RSSI<=35.
—If the signal strength indicator is represented by four
signal bars, it indicates that 35<RSSI<=45.
—If the signal strength indicator is represented by five
signal bars, it indicates that RSSI>45.
Displaying client
Displaying client detailed information
Select Summary > Client from the navigation tree to enter the Client page, click the Detail Information tab
on the page, and click the name of the specified client to view the detailed information of the client.
The detailed information of a client is as shown in Figure 30. F
or the description of the fields, see Table
19. For the description of the buttons on this page, see Table 20.
Figure 30 Displaying client detailed information
To Next Page
Loading...
Need help?
General
