292
With the client mode enabled, you can check the existing wireless services in the wireless service list.
Figure 290 Check the wireless service list
Connecting the wireless service
Method 1
1. Click the Connect icon of the wireless service in the wireless service list.
The SET CODE dialog box appears.
Figure 291 SET CODE
2. Configure the wireless service as described in Table 110.
3. Click Apply.
Table 110 Configuration items
Item Remarks
AuthMode
Specify the network authentication mode, which can be:
• Open System—Open system authentication, namely, no authentication
• Shared Key—Shared key authentication, which requires the client and the
device to be configured with the same shared key.
• WPA2+PSK—PSK authentication
To Next Page
Loading...
