361
Figure 391 Adding an IPv6 ACL
3. Configure the IPv6 ACL information as described in Table 116.
4. Click Apply.
Table 116 Configuration items
Item Descri
tion
ACL Number
Enter a number for the IPv6 ACL.
The value ranges of the ACL number vary by device.
Match Order
Select a match order for the ACL. Available values are:
• Config—Packets are compared against ACL rules in the order the rules are
configured.
• Auto—Packets are compared against ACL rules in the depth-first match order.
Description Set the description for the ACL.
Configuring a rule for a basic IPv6 ACL
1. Select QoS > ACL IPv6 from the navigation tree
2. Click the Basic Setup tab to enter the rule configuration page for a basic IPv6 ACL.
To Next Page
Loading...
