296
Figure 298 Enable 802.11n radio
Verifying the configuration
• The client can successfully associate with the AP and access the WLAN network.
• You can view the online clients on the page you enter by selecting Summary > Client from the
navigation tree.
Figure 299 View the online clients
Configuration guidelines
Note the following guidelines when you configure a wireless service:
• Select a correct district code.
• Make sure the radio unit is enabled.
Access service-based VLAN configuration example
Network requirements
An AP can provide multiple wireless access services. Different wireless access services can use different
wireless security policies, and can be bound to different VLANs to implement wireless access user
isolation.
As shown in Figure 300, c
onfigure wireless VLANs to satisfy the following requirements:
• Set up a wireless access service named research, and configure it to use PSK authentication. Clients
that access the wireless network are in VLAN 2.
• Set up a wireless access service named office, and configure it to use clear text authentication.
Clients that access the wireless network are in VLAN 3.
To Next Page
Loading...
Need help?
General
