H3C WA Series User Manual

284
Binding an AP radio to a wireless service
1. Select Wireless Service > Access Service from the navigation tree.
2. Click the Bind link of the wireless service to be bound to enter the page as shown in Figure 280.
Figure 280 Bind an AP ra
dio to a wireless service
3. Select the AP radio to be bound.
4. Click Bind.
Enabling a wireless service
1. Select Wireless Service > Access Service from the navigation tree.
The page for enabling a wireless service appears.
Figure 281 Enable a wireless service
2. Select the wireless service to be bound.
3. Click Enable.
Enabling a radio
Select Radio > Radio Setup from the navigation tree to enter the radio setup page and make sure the
802.11n(2.4GHz) radio is enabled.

H3C WA Series Specifications

General

Brand	H3C
Model	WA Series
Category	Wireless Access Point
Language	English