32
Field Descri
tion
Client Type Client type such as WPA2 (RSN), WPA, or Pre-RSN.
Authentication Method Authentication method such as open system or shared key.
AKM Method AKM suite used such as Dot1X or PSK.
4-Way Handshake State
Display the 4-way handshake state:
• IDLE—Displayed in initial state.
• PTKSTART—Displayed when the 4–way handshake is initialized.
• PTKNEGOTIATING—Displayed after the third message was sent.
• PTKINITDONE—Displayed when the 4-way handshake is successful.
Group Key State
Display the group key state:
• IDLE—Displayed in initial state.
• REKEYNEGOTIATE—Displayed after the initial message is sent to the
client.
• REKEYESTABLISHED—Displayed when re-keying is successful.
Encryption Cipher Encryption cipher: clear or crypto.
Roam Status Display the roaming status: Normal.
Up Time Time for which the client has been associated with the AP.
Table 20 Field description
Field Descri
tion
Refresh Refresh the current page.
Add to Blacklist
Add the selected client to the static blacklist, which you can display by
selecting Security > Filter from the navigation tree.
Reset Statistic Clear statistics of the specified client.
Disconnect Log off the selected client.
Displaying client statistics
Select Summary > Client from the navigation tree to enter the Client page, click the Statistic Information
tab on the page, and click the name for the specified client to view the statistics of the client.
To Next Page
Loading...
Need help?
General
