H3C WA Series User Manual

45
Figure 42 Set loghost
3. Configure the log host as described in Table 26.
4. Click Apply.
Table 26 Configuration item
Item Descri
p
tion
Loghost IP/Domain
Set the IPv4 address, domain name or IPv6 address of the loghost.
You can specify up to four loghosts.
Setting buffer capacity and refresh interval
1. Select Device > Syslog from the navigation tree.
2. Click the Logset tab.
The syslog configuration page appears.

H3C WA Series Specifications

General

Brand	H3C
Model	WA Series
Category	Wireless Access Point
Language	English