H3C WA Series User Manual

402
Figure 425 Setting the reference radio bandwidth
3. Set the reference radio bandwidth as described in Table 135.
4. Click Apply.
Table 135 Configuration items
Item Descri
p
tion
802.11a Mode
Set the reference radio bandwidth.
IMPORTANT:
Set the reference radio bandwidth slightly lower than the maximum available bandwidth..
802.11b Mode
802.11g Mode
802.11n Mode
NOTE:
A
fter you set the reference radio bandwidth values, the new settin
g
s do not take effect for the radios with
bandwidth guarantee enabled. To make the new settings take effect, you must disenable and then enable
the radios.
Setting guaranteed bandwidth
1. Select the desired radio on the radio list, and click its icon to enter the page for setting
guaranteed bandwidth.

H3C WA Series Specifications

General

Brand	H3C
Model	WA Series
Category	Wireless Access Point
Language	English