MAINTENCE AND ADJUSTMENT OF THE UTV
- 98 -
12. Remove:
·air bleed bolt ①
13. Fill cooling
(with the specified amount of the recommended
coolant)
NOTE:
The specified amount of coolant is a standard
amount. Fill the cooling system with coolant
until coolant comes out of the hole for the air
bleed bolt.
Coolant is potentially harmful and should be
handled with special care.
WARNING
:
·
If coolant splashes in your eyes, thoroughly
wash them with water and consult a doctor
；
·
If coolant splashes on your clothes, quickly
wash it away with water and then with soap
and water
；
·
If coolant is swallowed, induce vomiting and
get immediate medical attention
；
·
If coolant comes into contact with painted
surfaces, immediately wash them with water
；
·
Do not mix different types of antifreeze.
.
Recommended antifreeze
High-quality ethylene glycol antifreeze
containing corrosion inhibitors for
aluminum engines
Mixing ratio
1 : 1 (antifreeze : water)
Quantity total amount
1.32 L
Coolant reservoir capacity
To Next Page
Loading...
