Hisun HS800UTV - Checking the Front Brake Pads; Checking the Rear Brake Pads

MAINTENCE AND ADJUSTMENT OF THE UTV
- 104 -
cylinder when refilling. Water will significantly
lower the boiling point of the fluid and may
result in a vapor lock.
4. Close the hood.
CHECKING THE FRONT BRAKE PADS
1. Remove:
·front wheels
2. Check:
·brake pads Wear indicator groove ○
a
almost
disappeared
Replace the brake pads as a set.
Refer to “FRONT AND REAR BRAKES” in
chapter 5.
Brake pad wear limit ○a
1.5 mm (0.06 in)
3. Operate the brake pedal.
4. Install:
·front wheels
CHECKING THE REAR BRAKE PADS
1. Check:
·brake pads
Wear indicator groove ○
a
almost disappeared
Replace the brake pads as a set.
Refer to “FRONT AND REAR BRAKES” in
chapter 5.
Brake pad wear limit ○a
1.5 mm (0.06 in)
3. Operate the brake pedal.
.