Hisun HS800UTV - Checking the Wheels; Checking and Lubricating the Cables

MAINTENCE AND ADJUSTMENT OF THE UTV
- 116 -
CHECKING THE WHEELS
1. Check:
• Wheels Damage/bends①
Replace.
NOTE:
Always balance the wheel when a tire or wheel
has been changed or replaced.
WARNING :
• Never attempt even small repairs to the wheel.
• Ride conservatively after installing a tire to
allow it to seat itself properly on the rim.
CHECKING AND LUBRICATING THE CABLES
WARNING :
A damaged cable sheath may cause corrosion
and interfere with the cable movement. An
unsafe condition may result so replace a
damaged cable as soon as possible.
1. Check:
• cable sheath Damage
Replace.
•
cable operation Unsmooth operation Lubricate
or replace.
NOTE:
Hold the cable end up and apply several drops
of lubricant to the cable.
2. Apply:
• lithium-soap-based grease (onto end of the cable)
.