MAINTENCE AND ADJUSTMENT OF THE UTV
- 115 -
1. Measure:
• Tire pressure (cold tire pressure) out of
specification Adjust.
NOTE:
• The tire pressure gauge is included as①
standard equipment.
• If dust or the like is stuck to this gauge, it will
not provide the correct readings. Therefore,
take two measurements of the tire’s pressure
and use the second reading.
WARNING
:
Uneven or improper tire pressure may adversely
affect the handling of this vehicle and may
cause loss of control.
• Maintain proper tire pressures.
• Set tire pressures when the tires are cold.
• Tire pressures must be equal in both front
tires and equal in both rear tires.
2. Check:
• tire surfaces
Wear/damage○a
Replace.
Tire wear limit ○
a
Front and rear: 3.0 mm (0.12 in)
WARNING
:
It is dangerous to ride with a worn-out tire.
When tire wear is out of specification, replace
the tire immediately.
.
To Next Page
Loading...
