Hisun HS800UTV - Changing the Tail;Brake Light Bulb

MAINTENCE AND ADJUSTMENT OF THE UTV
- 126 -
2. Install:
• bulb new
Secure the new bulb with the headlight bulb
holder.
NOTE:
Avoid touching the glass part of the bulb. Keep
it free from oil; otherwise, the transparency of
the glass, life of the bulb, and luminous flux will
be adversely affected. If oil gets on the bulb,
thoroughly clean it with a cloth moistened with
alcohol or lacquer thinner.
• headlight bulb holder (with bulb)
• headlight bulb holder cover
• Close the hood.
CHANGING THE TAIL/BRAKE LIGHT BULB
1. Remove:
• Rear panel
• Tail/brake light bulb holder(with bulb)①
• Secure the new bulb with the tail/brake light bulb
holder.
• tail/brake light bulb holder (with bulb) ①
• bulb
NOTE:
Turn the bulb holder counterclockwise and
remove the defective bulb.
WARNING :
Keep flammable products and your hands away
from the bulb while it is on, since it will be hot.
Do not touch the bulb until it cools down.
.