CHASSIS
- 248-
Front Suspension and arm
·Check whether these components are greased
with butter and then tighten the up-and-down
rocker arm assembly and L/R fore dampers and
ther components. Fix the L/R tension rods into hole
by way of the trough of open-groove nut with
cotter pin (4 pcs), and make these tension rods
bisection on feet.
CHECKING THE STABILIZER
1. Check:
• bar, stabilizer
Bends/cracks/damage
Replace.
CHECKING THE STEERING KNUCKLES
1. Check:
• steering knuckles
Damage/pitting
Replace
CHECKING THE FRONT ARMS
1. Check:
• front arms
Bends/damage
Replace.
2. Check:
• Middle bushing
Wear/damage
Replace.
3. Check:
• ball joints
Damage/pitting
Replace the ball joint.
Free play Replace the ball joint.
Turns roughly
Replace the ball joint.