Honda CRF110F - Page 157

Install the clutch lifter plate [1].
Loosely install the four bolts [2].
Align the tabs
of the clutch discs.
Install the washer
[1J onto the clutch outer [2].
Install
the clutch center assembly [3] into the clutch
outer.
INSTALLATION
Install the collar [1] onto the mainshaft.
Apply oil to
the clutch outer guide [2] outer surface.
Install the clutch outer guide onto the mainshaft.
Install the collar [3] onto the crankshaft.
CLUTCH/GEARSHIFT LINKAGE
Align
131
111
Apply molybdenum disulfide oil to the primary drive ;::= ==~~~~~~~~~ ~1111 ~~~~
gear inner surface.
,
, ,
10·23