Honeywell Fusion4 MSC-L User Manual

Operation - System Configuration
Fusion4 MSC-L Part No.: 4418309_Rev09
5 - 100 Installation & Operation Manual
Honeywell
The System Config . General . Display screen appears.
2. On the System Config . General . Display screen, select each
entity to configure the display for the MSC-L.
5.13.1.1.3.1 System Config . Display . General Settings
On the System Config . General . Display screen, select <General
settings>. The following entities are displayed.
Entity Description Value range
[Display brightness]
With this entity you can enter the
brightness of the display. The
brightness is controlled by the backlight
of the display.
<0> % (low) ... <100> % (high)
(default =
<75> %)
[Auto brightness adjustment]
With this entity you can enable the auto
brightness feature. When enabled, the
ambient light sensor on the HMI senses
the ambient light and automatically
adjusts the brightness of the display.
<Enable> (default)
<Disable>
[Session timeout value]
With this entity you can enter the time
in seconds between the last key
pressed on the IR Controller and the
moment the display switches back to
one of the running screens.
<10> s ... <600> s
(default = <300> s)

Honeywell Fusion4 MSC-L Specifications

General

Brand	Honeywell
Model	Fusion4 MSC-L
Category	Desktop
Language	English