Operation - Truck Driver Operations
Fusion4 MSC-L Part No.: 4418309_Rev09
5 - 302 Installation & Operation Manual
Honeywell
1. When the MSC-L displays the Welcome! screen, press OK on the
keyboard.
If permissives are configured, then permissive connect screen
appears for each of the permissive similar to the grounding.
The Enter Pin screen appears only if the permissives are connected.
2. On the Enter Pin screen, enter the truck driver password using the
keyboard.
Press OK on the keyboard to confirm the password.
NOTE: The password is validated against the local database
or the remote database based on the configuration.
To Next Page
Loading...
