Operation - Truck Driver Operations
Part No.: 4418309_Rev09 Fusion4 MSC-L
Honeywell Installation & Operation Manual 5 - 303
If the password entered is not valid, then an error
message is displayed.
NOTE: Asterisks (*) appear as you type each character of
your password.
If the vehicle/carrier/trailer/contract identification is enabled, then you
can enter the respective IDs. These IDs are validated against the local
or the remote database based upon your device authorization settings.
3. Enter the ID on the vehicle ID screen.
4. Enter the following attributes using the keyboard to perform the
transaction setup.
NOTE: Press the ESC key on the keyboard to return to the
previous screen.
To Next Page
Loading...
