CONFIGURATION AND ANALYSIS SOFTWARE ENSUITE
Information for general use
Rev. M / 73023639
New functions or changed methods require additional parameters, which are then
provided in a new sub-path for editing.
Such structural changes in the parameter set are only possible in offline editing.
There are different types of parameters. Some of them can be switched. Some are displayed in
separate windows, for example under Export values. These are required partly because the function
groups of the device share their values via the parameter set. It must be ensured in every edited
parameter set that the cross-references are correct.
Figure 8.26: Example of switchable parameters
Figure 8.27: Example of export values in the Export values window
Whether the parameter type can be switched, depends on the actual parameter.
More details of the parameter types, units and windows are given in the online help.
To Next Page
Loading...
Need help?
General
