HP V1910 User Manual

128
b. Enable SNMP
 Select the Enable radio box.
 Select the v3 radio box.
 Click Apply.
# Configure an SNMP view.
 Click the View tab and then click Add to enter the page as shown in c.
c. Create an SNMP view (1)
 Type view1 in the text box.
 Click Apply to enter the SNMP rule configuration page, as shown in d.

HP V1910 Specifications

General

Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Manageable	Yes
Form Factor	Rack-mountable
Features	VLAN, QoS, Link Aggregation
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000 + 4 x SFP