131
Click Apply.
# Enable the agent to send SNMP traps.
Click the Trap tab and enter the page as shown in h.
h. Enable the agent to send SNMP traps
Select the Enable SNMP Trap check-box.
Click Apply.
# Add the target hosts of SNMP traps.
Click Add to enter the page as shown in i.
i. Add target hosts of SNMP traps
Select the destination IP address type as IPv4.
Type the destination address 1.1.1.2.
Type the user name user1.
Select v3 from the Security Model drop-down box.
Click Apply.
Table 43 Configure NMS.
To Next Page
Loading...
