HP V1910 User Manual

132
CAUTION:
The configuration on NMS must be consistent with that on the agent. Otherwise, you cannot perform
corresponding operations.
SNMPv3 adopts a security mechanism of authentication and privacy. You must configure the username and
security level. According to the configured security level, you must also configure the related authentication
mode, authentication password, privacy mode, privacy password, and so on.
You must also configure the aging time and retry times. After these configurations, you can configure the
device as needed through the NMS. For more information about NMS configuration, see the manual
provided for NMS.
Configuration verification
 After the above configuration, the NMS can establish an SNMP connection with the agent and query
and reconfigure values of objects in the agent MIB.
 If an idle interface on the agent is shut down or brought up, the NMS receives trap information sent by
the agent.

HP V1910 Specifications

General

Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Manageable	Yes
Form Factor	Rack-mountable
Features	VLAN, QoS, Link Aggregation
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000 + 4 x SFP