338
Enter the primary server IP address 10.1.1.2.
Select active as the primary server’s status.
Enter the secondary server IP address 10.1.1.1.
Select active as the secondary server’s status.
Click Apply to finish the operation.
# Configure the scheme used for communication between the device and the RADIUS servers.
Select the RADIUS Setup tab to enter the RADIUS parameter configuration page.
f. RADIUS parameter configuration
Select extended as the server type.
Select the Authentication Server Shared Key checkbox, and enter name in the textbox.
Enter name again in the Confirm Authentication Shared Key textbox.
Select the Accounting Server Shared Key checkbox, and enter money in the textbox.
Enter money again in the Confirm Accounting Shared Key textbox.
Enter 5 in the Timeout Interval textbox
Enter 5 in the Timeout Retransmission Times textbox.
Enter 15 in the Realtime-Accounting Interval textbox.
Click Apply to finish the operation.
Table 116 Configure AAA
# Create an ISP domain.
From the navigation tree, select Authentication AAA. The domain setup page appears.
To Next Page
Loading...
Need help?
General
