HP V1910 User Manual

# Configure the RADIUS authentication server.
 From the navigation tree, select Authentication  RADIUS. The RADIUS server configuration page
appears.
b. Configure the RADIUS authentication server
 Select Authentication Server as the server type.
 Enter 10.110.91.146 as the IP address of the primary authentication server
 Enter 1812 as the UDP port of the primary authentication server.
 Select active as the primary server status.
 Click Apply.
# Configure the RADIUS accounting server.
c. Configure the RADIUS accounting server
 Select Accounting Server as the server type.
 Enter 10.110.91.146 as the IP address of the primary accounting server.
 Enter 1813 as the UDP port of the primary accounting server.

HP V1910 Specifications

General

Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Manageable	Yes
Form Factor	Rack-mountable
Features	VLAN, QoS, Link Aggregation
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000 + 4 x SFP