HP V1910 User Manual

 Select active as the primary server status.
 Click Apply.
# Configure the parameters for communication between the switch and the RADIUS servers.
 Select the RADIUS Setup tab.
d. Configure RADIUS parameters
 Select extended as the server type.
 Select the Authentication Server Shared Key check box and enter expert in the text box.
 Enter expert in the Confirm Authentication Shared Key text box.
 Select the Accounting Server Shared Key check box and enter expert in the text box.
 Enter expert in the Confirm Accounting Shared Key text box.
 Select without-domain for Username Format.
 Click Apply
Table 138 Configure AAA
# Create an ISP domain.
 From the navigation tree, select Authentication  AAA. The domain setup page appears.

HP V1910 Specifications

General

Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Manageable	Yes
Form Factor	Rack-mountable
Features	VLAN, QoS, Link Aggregation
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000 + 4 x SFP