HP V1910 User Manual

38
b. Configure global parameters for the stack on Switch A
 Type 192.168.1.1 in the text box of Private Net IP.
 Type 255.255.255.0 in the text box of Mask.
 Select Enable from the Build Stack drop-down list.
 Click Apply.
Now, switch A becomes the master switch.

HP V1910 Specifications

General

Switching Capacity	56 Gbps
Forwarding Rate	41.7 Mpps
Manageable	Yes
Form Factor	Rack-mountable
Features	VLAN, QoS, Link Aggregation
Operating Temperature	0°C to 45°C
Operating Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000 + 4 x SFP